Ducon Skim Coat
Smooth, thin layer applied over surfaces to correct imperfections
Ducon Skim Coat is a smooth, thin layer applied over surfaces to correct imperfections, providing a flawless finish before painting or tilling.
Pack Size:
25 KG
Skim Coat Price in Bangladesh:
3500 Taka
Consumption :
1.4m² per 25 kg bag at 10mm thickness
What is Skim Coat?
Acting as a refined micro-layer of polymer-modified or cement-based material, a skim coat is expertly brushed or troweled over interior and exterior surfaces to erase minor flaws, small cracks, and pitting. By delivering an impeccably smooth, uniform canvas prior to painting or texturing, it dramatically enhances paint adhesion, structural perfection, and the final aesthetic quality of the wall or ceiling.
Application Process
The sequence below reproduces the Ducon Tile Bond Technical Data Sheet and doubles as a tile adhesive how to mix and apply step by step briefing for supervisors. Work should go to trained operatives.
1. Surface Preparation
Remove dust, dirt, grease, loose particles, and damaged material. Repair major cracks and imperfections
2. Mixing Procedure
Apply a suitable primer or bonding agent where required to improve adhesion and control surface absorption.
3. Mixing
Mix the skim coat material with the recommended amount of clean water until a smooth, lump-free consistency is achieved.
4. First Coat Application
Apply a thin, even layer using a trowel or skim coat blade, maintaining consistent thickness across the surface.
5. Smoothing & Second Coat
Allow the first coat to set as recommended, then apply a second thin coat if necessary and smooth the surface thoroughly.
6. Curing & Final Finishing
Allow the skim coat to dry or cure properly, then lightly sand any minor imperfections before applying paint or the final decorative finish.
Ducon Skim Coat: Features
- High bonding strength for superior adhesion.
- Smooth skim coat texture with excellent workability.
- Resistant to moisture and cracks.
- Available in different grades for various applications.
- Cost-effective with competitive skim coat paint price in Bangladesh.
Benefits: Ducon Skim Coat
- Provides a smooth, flawless finish for walls and floors.
- Enhances adhesion for paint, wallpaper, and coatings.
- Reduces cracks and surface imperfections effectively.
- Ensures long-lasting durability and weather resistance.
- Easy to mix, apply, and dries quickly.
Ducon Skim Coat: Usages Area
- Skim coat wall application for both interior and exterior surfaces.
- Ideal for skim coat floor to create a level surface before tiling.
- Suitable for concrete, cement plaster, drywall, and brick surfaces.
- Used in residential, commercial, and industrial buildings.
Applications & Use Cases
01
Wall & Ceiling Finishing
Creates a smooth, uniform surface on interior walls and ceilings before painting or decoration.
02
Repairing Surface Imperfections
Helps cover minor cracks, pores, pinholes, scratches, and uneven areas for a refined finish.
03
Concrete & Masonry Surfaces
Used on concrete, plaster, brick, and other suitable surfaces to improve appearance and provide a better base for subsequent finishes.
Quality Assurance & Compliance
ISO 9001:2015
Quality Certified
TDS & MSDS
Available on request
Laboratory Tested
Quality Verified Products
Bulk & Export
Factory-direct dispatch
Frequently Asked Questions
What is the difference between a skim coat and traditional wall putty in Bangladesh?
While both smooth surfaces, wall putty is generally thicker for leveling, whereas skim coat is a thin, polymer-modified layer designed for stronger adhesion, flexibility, and crack resistance before finishing.
How much does a standard bag of skim coat cost in the Bangladeshi market?
Pre-mixed, polymer-modified skim coat powders (typically packed in 25 kg bags) typically range from BDT 3,000 to BDT 3,500 per bag.
Can a skim coat prevent dampness and damp patches on interior walls during the rainy season?
Unlike standard skim coats, waterproof skim coats use polymer-modified formulations to resist moisture penetration, reduce damp patches, and help prevent mold growth during Bangladesh’s heavy monsoon season.