Duconmix WPR 700

Water-reducing Concrete admixture

Manufactured by Ducon Construction Chemicals Industries Ltd. at our Gazipur production facility, Duconmix WPR 700 is a liquid, polymer-based water reducing concrete admixture built for engineers and contractors who need stronger, more watertight concrete without redesigning the mix. As a high performance water reducing admixture, it lowers water demand, improves workability, and reduces water penetration in a single dose, tested to IS:9103, IS:2645-2003, and ASTM C494 Type A.

Pack Size:

5 kg, 10 kg, 20 kg, 250 kg and 1 Ton drums

Consumption:

200 mg per 50kg cement bag

Request a Quote
Download TDS
Duconmix WPR 700
Ducon Tile Adhesive
sqr012-col2

What is Duconmix WPR 700?

Ready-mix plants and site engineers in Bangladesh are usually choosing between two separate products: a plasticiser that improves workability, and a waterproofing admixture that seals the concrete against moisture. Duconmix WPR 700 was formulated to close that gap in one product. It is a specially formulated polymer-based liquid, compatible with all types of cement and cementitious binders, including fly ash, ground granulated blast furnace slag, silica fume, and metakaolin, so it fits into most existing mix designs without adjustment.

Ducon Construction Chemicals Industries Ltd. manufactures Duconmix WPR 700, a high-performance water-reducing admixture, under controlled batch conditions at its own facility and backs every drum with a technical data sheet, test certification, and dosage guidance rather than site-level guesswork. For procurement teams comparing concrete admixture prices in Bangladesh across multiple suppliers, that batch-to-batch consistency is often the deciding factor over a marginally lower quote, and it is one reason Ducon is recognised among the industrial concrete admixture suppliers BD ready-mix operators return to for repeat orders.

Concrete Admixture Duconmix ESP 100
sqr012-col2
Ducon Tile Adhesive

Properties

Concrete Admixture Duconmix WPR 700
Ducon Tile Adhesive
sqr012-col2

Key Features:

  • Ready-to-use liquid; no on-site blending required
  • Low dosage, effective from as little as 200 g per 50 kg bag of cement
  • Reduces mixing water while maintaining or improving slump
  • Improves pumpability and reduces segregation during placement
  • Delivers a smoother surface finish on formed and trowelled concrete
  • Increases compressive strength by lowering the water-cement ratio
  • Waterproofing action: measurably reduces surface water absorption
  • Chloride-free formulation; will not initiate or accelerate steel corrosion
  • Dark brown liquid, specific gravity 1.065 ± 0.02 at 25°C, pH ≥ 6

Benefits : Ducon Mix 700

At the batching plant: lower water demand means using admixture to reduce cement content in concrete becomes achievable without sacrificing target strength, helping ready-mix operators manage material cost per cubic metre while still meeting the specified grade.

During placement: extended workability, in excess of 60 minutes at +25°C, gives crews more time to place and finish concrete on hot, humid days, a real constraint on most Bangladesh job sites between March and September.

Over the structure's service life: reduced permeability limits chloride ingress, sulfate attack, and freeze-related deterioration, cutting long-term repair cost, particularly in marine, sewage, and water-retaining structures where re-entry for repair is expensive.

Concrete Admixture Duconmix WPR 700
Ducon Tile Adhesive
sqr012-col2
Concrete Admixture Duconmix RSP 600
Ducon Tile Adhesive
sqr012-col2

Ducon Mix 700 : Usages Area

  • Foundations and basements, where dampness and seepage are recurring complaints
  • Tunnels, sea walls, barrages, and other below-grade or marine structures
  • Bridge decks and highway structures, where a concrete chemical for bridge and highway projects must resist chloride and weather cycling over decades
  • Roof slabs, podium decks, and exposed superstructure elements
  • Water tanks, reservoirs, and sewage or water-treatment structures
  • Precast concrete units requiring a consistent surface finish
  • Plaster mortar and general structural concrete in residential and commercial builds