Digital guide

You are here:

Dupoxy SC (Stone Coating)

15,000.00৳ 

Dupoxy SC: Epoxy Stone Coating Floor

Seamless epoxy and colored quartz sand floor with a natural stone look. Waterproof, hard and easy to clean. Available in 12 colors.

Pack: 20 kg Part A + 2.5 kg Part B. Mix ratio 8 : 1 by weight.

Description

Dupoxy SC: Epoxy Stone Coating by Ducon Construction Chemicals Industries Ltd.

Dupoxy SC is an epoxy stone coating for floors. It mixes colored quartz sand with strong epoxy resin. The result is a seamless floor that looks like natural stone or marble. It is hard, waterproof and very easy to clean. Many people also call it epoxy quartz flooring or colour sand epoxy floor coating.

Key Features

  • Natural stone and marble look in 12 colors
  • Seamless floor with no joints
  • Shore D 80+ hardness and 2 MPa+ bond strength
  • Waterproof, slip-resistant and chemical resistant
  • Stops mold and bacteria
  • Low VOC, non-toxic and low smell

Where to Use

Factories, garments (RMG), food and pharma plants, hospitals, labs, shopping malls, showrooms, offices, banks, hotels, restaurants, schools and homes.

Pack Size and Mix Ratio

Part A comes in 8 kg and 20 kg packs. Part B (hardener) comes in 1 kg and 2.5 kg packs. Mix by weight at A : B = 8 : 1. Use the mix within 30 to 40 minutes.

Drying Time

At 25°C, the surface dries in 6 hours and the floor fully dries in 24 hours.

Stone Coating Price in Bangladesh

The Dupoxy SC 20 kg set (20 kg Part A + 2.5 kg Part B) costs Tk 15,000. Call us for the 8 kg set price. For full installation, we give a per square feet quote after a free site visit. Learn more on our epoxy stone coating in Bangladesh page.

Additional information

Application Process

Grind and clean the concrete so it is sound, dry and free of dust and oil. Apply 1 or 2 coats of epoxy primer. Fill holes and cracks with a leveling layer. Mix Part A and Part B at 8 : 1 by weight, add the colored quartz sand and mix well. Pour and spread evenly with a trowel, starting from the corners. Roll a spiked roller over the wet coat to remove air bubbles. Let it cure for 24 hours at 25°C before full use.

You may also like